Thread Gauge foar sucker rod en buizen
Sucker Rod Thread Gauge
| Spesifikaasje | GYG 16 (5/8") | GYG 19(3/4”) | GYG 22 (7/8") | GYG 25(1") | GYG 29 (11/8") |
| Wurkplugmeter (T/Z) | B2, B6 | B2, B6 | B2, B6 | B2, B6 | B2, B6 |
| Ynstelle Plug Gauge (T/Z) | p7, p5 | p7, p5 | p7, p5 | p7, p5 | p7, p5 |
| Wurkringmeter (T/Z) | p8, p6 | p8, p6 | p8, p6 | p8, p6 | p8, p6 |
| Master ringmeter (T/Z) | B1,B5 | B1,B5 | B1,B5 | B1,B5 | B1,B5 |
Rjochte Thread Gauge Series
| Gewoane metryske tried | M1.0~M300 |
| Unified Thread Standard (UTS) | UNC,UNF,UNEF,UN,UNS |
| Whitworth Thread | BSW/BSF/Whit.S/Whit. |
| Metric Aerospace Thread | MJ |
| Unified Inch Aerospace Thread | UNJ |
| Metryske trapeziumdraad | Tr |
| Unified Inch Trapeziumdraad | ACME, STUB ACME |
| Britske Buttress Thread | BSButtress |
| Unified Inch Buttress Thread | BUT |
| Britske en Unified Inch Pipe Thread | 55°R,G/60°NPT |
| Back Pressure Valve Thread | HBPV rige |
| Oare Non-standert Thread Series |
Sharp Vee Thread Gauge
| SHARP VEE TUBING UPSET / NON-UPSET | |||||
| Nominale Grutte | O.D | OERSTJOERTPI (Tosken per inch) | NON -UFSETTPI(Tosken per inch) | T.PF(Taper in/ft) | |
| 1-/4 | 1.660 | 11-1/2 | - | 3/4 | 1:16 |
| 1-/2 | 1.900 | 11-1/2 | 11-1/2 | 3/4 | 1:16 |
| 2 | 23/8 | 10 | 11-/2 | 3/4 | 1:16 |
| 2-1/2 | 27/8 | 10 | 11-1/2 | 3/4 | 1:16 |
| 3 | 31/2 | 10 | 11-1/2 | 3/4 | 1:16 |
| 3-1/2 | 4 | 10 | 10 | 3/4 | 1:16 |
| 4 | 41/2 | 10 | 10 | 3/4 | 1:16 |
Spesjale Thread Gauge
| Double Step Seal High Torque Resistance Series Thread Gauge | |
| AMMT Series Thread Gauge | 1 MMT, 11/2AMT |
| Special Number, Reguliere Connection Series Thread Gauge | NC33, NC36, NC52, NC53, 63/4REG, 73/4REG |
| Special Offset Trapezium Series Thread Gauge | 27/8 BCSG, 31/2 BCSG, 4 BCSG, 71/8 BCSG, 77/8BCSG |
| Core Rod Metric Thread Gauge | φ114.3, φ89 |
| Screw Drill Tool Series Thread Gauge | 8 7/8-4 1:8, 6 3/4-4 1:9, 7 1/8-4 1:12, 6 3/4-6 1:16 |
| Non-ôfgraving Drill Rod, Coal Mine, Geologyske Drill Rod Metric Thread Gauge | D80, D33, CASE6030, φ42, φ60, φ73 |
| Multi-start Thread Series | |
| Oare Special Pitch, Taper, flank Angle, Pitch Diameter Series Thread Gauge | |
API SPEC 5B
| BCSG | CSG | TBG/NUE | UPTBG /EUE | LP |
| 4 1/2" BCSG | 41/2" CSG | 1.050"TBG | 1.050"UPTBG | 1 1/4" LP |
| 5" BCSG | 5" CSG | 1.315"TBG | 1.315"UPTBG | 1 1/2" LP |
| 5 1/2" BCSG | 5 1/2" CSG | 1.660"TBG | 1.660"UPTBG | 2" lp |
| 6 5/8" BCSG | 6 5/8" CSG | 1.900"TBG | 1.900"UPTBG | 2 1/2" LP |
| 7" BCSG | 7" CSG | 2 3/8" TBG | 2 3/8" UPTBG | 3" lp |
| 7 5/8" BCSG | 7 5/8" CSG | 2 7/8"TBG | 2 7/8" UPTBG | 3 1/2" LP |
| 8 5/8" BCSG | 8 5/8" CSG | 3 1/2"TBG | 3 1/2" UPTBG | 4" lp |
| 9 5/8" BCSG | 9 5/8" CSG | 4" TBG | 4" UPTBG | 5" lp |
| 10 3/4"BCSG | 103/4"CSG | 4 1/2"TBG | 4 1/2" UPTBG | 6' lp |
| 11 3/4"BCSG | 11 3/4" CSG | - | - | 8" lp |
| 13 3/8"BCSG | 13 3/8" CSG | - | - | 10" LP |
| 16" BCSG | 16" CSG | - | - | 12" LP |
| 18 5/8"BCSG | 1 85/8" CSG | - | - | 14D LP |
| 20"BCSG | 20" CSG | - | - | 16 D LP |
API SPEC 7-2
| NC | IF | FH | REG | H90 | SLH90 | PAC | GOST | SH | WO | XH | |
| NC10 | NC40 | 23/8" IF | 27/8" FH | 1" REG | 31/2" H90 | 23/8"SLH90 | 23/8" PAC | Z161 | 23/8"SH | 23/8" WO | 27/8" XH |
| NC12 | NC44 | 27/8" IF | 31/2" FH | 11/2" REG | 4 h90 | 27/8"SLH90 | 27/8" PAC | Z189 | 4" SH | 27/8" WO | 31/2" XH |
| NC13 | NC46 | 31/2" IF | 4" FH | 23/8" REG | 41/2" H90 | 31/2"SLH90 | 31/2" PAC | 31/2" WO | |||
| NC16 | NC50 | 4" IF | 41/2" FH | 27/8" REG | 5 h90 | ||||||
| NC23 | NC56 | 41/2" IF | 51/2" FH | 31/2" REG | 51/2" H90 | ||||||
| NC26 | NC61 | 51/2" IF | 65/8" FH | 41/2" REG | 65/8" H90 | ||||||
| NC31 | NC70 | 65/8" IF | 51/2" REG | 7 h90 | |||||||
| NC35 | NC77 | 65/8" REG | 75/8°H90 | ||||||||
| NC38 | 75/8" REG | 85/8" H90 | |||||||||
| 85/8"RE G | |||||||||||
